Monthly supply

1. Packaging requirements for single module  The single module must be packaged separately after processing or transportation to prevent profile damage. The basic principle of packaging is to set a large flat plate and module body at the bottom. After the module is placed stably, it can be wrapped tightly with soft plastic paper and fixed in position.  2. Transportation requirements of single module  Select a suitable vehicle and place the modules well to ensure that the bumps during transportation will not hurt the modules. In the process of vehicle transportation, attention shall also be paid to minimize excessive vibration.  3. Packaging requirements of assembly  The general manager of Chengdu must bind special transport wooden cases. The bearing capacity of the wooden cases shall be considered, and a forklift slot shall be set at the bottom. There should be a rainproof layer inside the wooden box, and the sealing of the connection is good. The main inspection tool shall have a strong fixed support in the wooden box to ensure the stability during transportation  4. Assembly transportation requirements

Before the assembly is transported, the driver shall be trained. The driving speed shall not be too fast and the vibration shall be minimized. The whole process of transportation must be a special vehicle arranged. When arriving at the destination, it is necessary to check with the user to ensure its integrity, and the whole process must be kept strictly confidential.

5. The whole project is transported in a constant temperature carriage at 20 ± 2 º